FAG 7032-MP-UA Angular Contact Ball Bearings

Cg - Geometry Factor:0.0668; Aa - Cage-Cone Backface Clearance:0.5 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; d:31.750 mm; R - Cone Backface To Clear Radius1:0.760 mm; C0 - Static Radial Rating:13900 lbf; Series:

d:55 mm; Bearing number:NJ 2211; B:25 mm; Basic dynamic load rating (C):75 kN; Outer Diameter (mm):100; Bore Diameter (mm):55; r1 min.:1.1 mm; (Grease) Lubrication Speed:6200 r/min; Size (mm):55x100x25; Weight:0.780 Kg;

Calculation factor (e):0,35; Fatigue limit load, Cu:39.6 kN; Static load, C0:350 kN; d:80 mm; Dynamic load, C:291 kN; Basic dynamic load rating (C):291 kN; Characteristic inner ring frequency, BPFI:9.43 Hz; D:170 mm; Db min:159 mm; Weight / Kilogram:0;

C:12,7 mm; Inventory:0.0; EAN:4547359057614; Basic static load rating (C0):9,65 kN; Fw:14,288 mm; Weight / Kilogram:0.009; Outer Diameter (mm):19,05; Brand:NTN; Category:Roller Bearings; Bore Diameter (mm):14,288;

Series Type:Medium Series; Cor - Static Load Rating:67443 lbf; Bearing - Housing - Seal:MSE215BXH; Cr - Dynamic Load Rating:58001 lbf; Shaft Size:2-15/16 in; Dimension N:8.5 in; Dimension P:0.7 in; Bearing UPC:013992032041; Dimension R:10.8 in; Maximum Speed:3080 rpm;

Nlim (grease):2,700 rpm; Bc:29,700 mm; Brand:NTN; Fw:100,000 mm; Max operating temperature, Tmax:120 °C; Cr:76 kN; Lw:25.4 mm; Outer Diameter (mm):108,000; Dw:4 mm; C0r:201 kN;

Bore Diameter (mm):6; ID Chamfer Length (Ci):0.500; Bearing Bore after Mounting (di) - 6.068:6.02; Shaft Dia., Nominal (d):6.0000; Bearing Length, Nominal (B):5.000; Outer Diameter (mm):8; ID Chamfer Angle (B deg.):30; Brand:AST; Bearing Outside Diameter, Nominal(Do):8.000; Bearing Type:straight;

Size (mm):127x228.6x34.925; d:127 mm; Brand:RHP; Outer Diameter (mm):228,6; (Grease) Lubrication Speed:1400 r/min; Basic dynamic load rating (C):88 kN; Weight:6,44 Kg; D:228,6 mm; Basic static load rating (C0):33,3 kN; Width (mm):34,925;

Thread Size (G):M20 X 1.5; Spherical Diameter (dk or Dk):34.930; Brand:AST; Bearing Type - steel-on-PTFE composite:steelonPTFE composit; Thread Length (l1):45.000; Rod End Thickness (C1):18.500; Radius (min) (rs):0.600; Bore Center to Body (l7):28; Width (mm):25; Bearing number:SAJK20C;

C:25 mm; Width (mm):25; Weight:0,54 Kg; S:0,3 mm; Outer Diameter (mm):95; Basic dynamic load rating (C):59,4 kN; da max:78 mm; B:25 mm; r min.:1 mm; Da max.:90 mm;

da:206 mm; Size (mm):193.675x282.575x47.6; Basic dynamic load rating (C1):398 kN; Factor (G2):130,8; Factor (K):1,41; Width (mm):47,625; Basic static load rating (C0):692 kN; Factor (G1):574,6; Weight:9,47 Kg; a:3,8 mm;

Size (mm):8x14x3.5; D:14 mm; Outer Diameter (mm):14; d:8 mm; Basic static load rating (C0):0,386 kN; Bore Diameter (mm):8; C:3,5 mm; Width (mm):3,5; Basic dynamic load rating (C):0,817 kN; Brand:ZEN;

Width (mm):4; Size (mm):4x12x4; D:12 mm; Basic dynamic load rating (C):0,8 kN; Bearing number:604; Bore Diameter (mm):4; B:4 mm; r2 min.:0,2 mm; Outer Diameter (mm):12; C:4 mm;

Brand:CX; Bearing number:NF3048; Size (mm):240x360x92; d:240 mm; Ew:330 mm; D:360 mm; Bore Diameter (mm):240; Width (mm):92; (Grease) Lubrication Speed:1600 r/min; B:92 mm;

Enclosure:2 Metal Shields; Snap Ring:No; series:62; Product Group:B00308; Other Features:Deep Groove | Extrem; cage material:Graphite; da - min.:21.2 mm; Internal Special Features:Coronet Cage; operating temperature range:-240 to +660 &d; Outer Race Width:0.472 Inch | 12 Mill;