DODGE TP-GLT7-208 Take Up Unit Bearings

Nref:11,000 rpm; ra max:1 mm; Characteristic rolling element frequency, BSF:5.26 Hz; k:2 mm; Characteristic outer ring frequency, BPF0:5.74 Hz; Radial clearance class:C3; Dynamic load, C:71.9 kN; d:30 mm; Characteristic inner ring frequency, BPFI:8.26 Hz; Da max:56.4 mm;

C1:4.4 mm; B2:13.5 mm; Recommended tightening torque for set screw:5.5 Nm; d:20 mm; S:17 mm; C0:6.65 kN; T min.:-20 °C; Weight:0.22 kg; C:16 mm; G:M6x1;

H2:70 mm; s1:24.2 mm; H:36.5 mm; S:7.5 mm; T max.:100 °C; H1:14.5 mm; d1:37.4 mm; A:36 mm; B:21.4 mm; T min.:-20 °C;

Bearing Weight:0.30 Kg; G2 - Heat Generation Factor (Rib-Roller End):9.7; e - ISO Factor8:0.41; Da - Cup Frontface Backing Diameter:60.96 mm; d:31.750 mm; R - Cone Backface To Clear Radius1:3.560 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1920 lbf; G1 - Heat Generation Factor (Roller

SKU:ls7-hoffmann; d:0.625 Inch; Weight:0.20 KGS; Clearance:Standard; Availability:In Stock; Seals or Shields:Open Type; D:1.563 Inch; B:0.438 Inch;

Y1 - ISO Factor8:1.67; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)4:1100 lbf; R - Cone Backface To Clear Radius1:0.050 in; D:1.2000 in; Ab - Cage-Cone Frontface Clearance:0.09 in; Cg - Geometry Factor11:0.0308; Bearing Weight:0.2 lb; C1 - Dynamic Radial Rating (Two-Row, 1 millio

N:12mm; Z:37 mm; B:31 mm; e:10 mm; J:78 mm; Designation of open end cover:SCO204-12; A2:28.3 mm; Dz:54 mm; s1:15.5 mm; C:12.8 kN;

Z:51.8 mm; A:48 mm; Weight:1.06 kg; Recommended tightening torque for set screw:5.5 Nm; E:18 mm; C:19.5 kN; H2:84 mm; H:42.9 mm; N:M14; Dz:70 mm;

C - Dynamic Load (Basic):97700 lb; C0 - Static Load:113000 lb; Dimension D Min:10.04 in; Dimension S:4.590 in; Oil Lubrication - M/N Seal:1200 rpm; Y2 - Geometry Factor:4.24; Dimension F:14.25 in; UPC Code:0883450089128; Eng Internal Radial Clearance - Min:0.0030; Grease Lubrication - T Seal:1600 rp

G1 - Heat Generation Factor (Roller-Raceway)10:37.8; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; T - Bearing Width to Flange:0.4375 in; d:1.5748 in; R - Cone Backface To Clear Radius1:0.03 in; Cg - Geometry Factor11:0.0873; da - Cone Frontface Backing Diameter:1.97 in; D:3.3750 in; C1 - Cup Flange Wi

f0:11.4; Outer Race Width:0.433 Inch | 11 Mill; Snap Ring:No; Outside Diameter:1.378 Inch | 35 Mill; Cage Material:Steel; ra max:0.6 mm; Dynamic load, C:8.2 kN; Radial clearance class:C3; D:35 mm; d:10 mm;

D:90mm; Static Load Rating (kN):23.2; Cage Type:Steel; Reference Speed Rating (r/min):11000; Limiting Speed Rating (r/min):7700; SKU:6210 -timken; Dynamic Load Rating (kN):35; Weight:0.46 KGS; B:20mm; Availability:In Stock;

Appropriate Hydraulic Nut:HMV88; Ro:G1/4; Appropriate Withdrawal Nut No.:HM3088; Weight:27.30 Kg; L1:196 mm; d1:400.00 mm; b:34 mm; t:15 mm; e:9.0 mm; L1:186.00 mm;

Availability:In Stock; SKU:7022acd/p4adgb-skf; B:28mm; d:110mm; Preload:Medium; Weight:1.95 KGS; Oil Limiting Speed (r/min):11000; D:170mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):104;

H:89 mm; C:14 kN; SW:3.18 mm; A:32 mm; P:150 mm; L:97 mm; d:22.22 mm; B:34 mm; H2:51 mm; Weight:0.84 kg;